Still need to get out of the car to open the gate? We know how boring and uncomfortable this task can be, especially if the gate is heavy or it’s a very rainy and cold day.
Gain safety, comfort and time with the installation of an automatic gate.
To simplify your life, we have available a wide range of automations for garage doors, both for indoors and outdoors and with remote control.
When programming the remote control, some questions may arise. Therefore, we decided to develop this article, so that, in a simple way, you can program the remote control of your automatic gate.
Note: This article does not invalidate the support of a specialized technician.
How to memorize a new remote control
Follow the instructions to program remote control:
- Access the remote control programming menu
- Press CMD button
- Defines whether to memorize for full opening (SU) or pedestrian opening (SP)
- Use UP and DW buttons to choose SU or SP
- Use CMD button to confirm choice
- Press the button of the remote control you want to memorize
- Remote control memorized successfully!
How to memorize a new remote control
Follow the instructions to program the remote control:
- Press the indicated buttons simultaneously for 10 seconds
- Press the button of the remote control you want to memorize
- Remote control memorized successfully!
ROSSO EVO - How to memorize remote control
Follow the instructions to program remote control (ROSSO EVO motor):
- Press the T button until the display shows SU
- Press twice the desired button of the remote control you want to configure
- Remote control memorized successfully!
ROSSO EVO - How to memorize remote control
Follow the instructions to program the remote control (ROSSO EVO motor):
- Press the bottom two buttons on an already memorized remote control until the motor LEDs flash
- Press twice on the new remote control the button you want to memorize
- Remote control memorized successfully!
If you would like to know more about our solutions, please contact us.
We will be happy to help and clarify your doubts.
Great videos but I have a control panel that does not have 4 buttons one being the CMD button the video refers to. My model has two buttons, SEL and SET. How do I program my remotes using those buttons. I have looked on uTube but there is nothing in English or officially from you.
Hello Julie. Thanks for your message. We are happy to help.
Your comment has been forwarded to one of our professionals. You will soon receive an answer from us.
Thank you very much.
Great videos. But please can you tell me what the difference is between an SU full opening and a SP pedestrian opening for the motorline Falk remote control
Hello Natalie. Thanks for your message. We are happy to help.
Your comment has been forwarded to one of our professionals. You will soon receive an answer from us.
Thank you very much.