OPERATING MODES
The MF2020 photocell has three operating modes:
1 – SEQUENTIAL MODE
The photocell can differentiate between an interruption caused by an object and the movement of the door.
For this mode to work correctly, the door must be opaque.
2 – STATIC MODE
In this mode, the photocell will activate the output when any of the sensors is interrupted.
3 – SEQUENTIAL MODE FOR TRANSPARENT TARPAULINS
The photocell can differentiate between an interruption caused by an object and the movement of the door.
For this mode to work properly, the bottom of the tarpaulin must be opaque by at least 200mm.
360° ADJUSTABLE ANGLE
In order to ensure perfect alignment between the beams of each column, it is possible to rotate their positions 360°:
- Remove the column cover at the top and bottom;
- Loosen the two adjustment screws at each end of the column;
- Adjust the position of each column by rotating it until the beams line up.
KIT COMPOSITION
-
- 2 Column photocells (Receiver and Transmitter)
- 1 Control board Connection cable (A)
- 1 Synchronization cable (B)
